How To Read Direction On A Plat Map

Typically, a plat map can be found somewhere in the pile of papers your title company presents to you at closing. Not limited to, boundaries, corners, markers, monuments, easements and other rights.

Whose Pot of Gold? Practice directions using the compass

If you plan to overlay your plat onto a modern day usgs quadrangle map, then convert all distances to usgs scale and include them on your chart.

How to read direction on a plat map. The maps scale tells you how detailed your map is. Plot the first distance listed in your spreadsheet. If the property is not located within a.

Before getting into the technical knowledge of how to read a topographic map, heres a little history. For example, if you plan to install a solar panel array, its important to have southern exposure to make the most of the suns rays. It is easy to see if this is correct by looking at the drawing.

The direction of travel from point 1 to point 2 is northwest and this coincides with the call since the first and last letters of the direction are n and w respectively. This will show the boundaries of the lot. Next, find the survey legend.

Plan drawn to scale of one or more. How to read a land survey map. This type of legal description dates back hundreds of years.

The legend contains information on each topographic symbol used on the map. Generally a title report will show a preliminary plat map with the lot on it if it is contained within a subdivision. The information found on a survey depends on its type and intended use.

(i recommend plotting your boundaries in pencil and erasing your direction dots as you go along so you don't get confused.) A surveyor uses measurement techniques and tools to translate legal technical documents describing the land into positions on the ground. To read a plat, first locate the north arrow.

Land platting experts patricia law hatcher and mary mccampbell bell suggest to their students that they underline the lines, circle the corners, and use a wavy line for meanders. Orient the map so that north is at the top to make map reading easier. How to read a topographic map.

The line represented by this is shown in black, starts at green and ends in red. Every lot and block survey is part of a larger plat map which has a permanent reference monument or control point. Read the compass degree system by starting with a specific point on the compass (north, east, south or west), and then reading the number of the degrees to the next point on the compass.

It uses bearings and distances to measure the circumference of the property described in the legal description and is based on physical features of its geography as well as directions and distances. The amp must ensure that it meets the requirements detailed in the municipal subdivision regulations. Read the legend of the map.

This can be extremely important in a number of scenarios. The scale will be the ratio between the distance on the map and the distance of the actual property. In figure 2, a deed call of s 0 23' 44 e 290.40 feet represents a line pointing down (s) and to the right (e).

The scale of your plat map will be in the maps legend. This will orient you to the propertys actual location on the ground. Parcels, tracts or subdivisions of land, showing, but.

Use a ruler to get the most accurate reading of your plat map. A plat map will let you know for sure which direction the property youre interested in is facing. Draw a solid dot on your graph paper to indicate your starting point.

A land survey plat is a map depicting characteristics of the land and their relative positions. The top of the map should be north. A deed call of n 0 23' 44 w 290.40 feet represents a line pointing up (n) and to the left (w).

As a note of interest, if you encounter a call that is in the wrong direction, the direction of travel can be easily reversed by simply exchanging both directions on the call. If your deed description uses poles, rods, or perches, then divide each distance by 4.8 for an easy conversion. Topographic maps were invented by a man named john wesley powell, a union army veteran and geologist who in 1884 convinced congress to authorize a painstaking cartography project in which powells team would systematically create topographic maps to better.

The corners of your plat map will have the book and page number. Now, go back and mark the distance and direction for the rest of the points in turn. This reads north, 63 degrees east.

If a plot is micro, then a plat is macro. To read a map, start by looking at the compass rose on the top of the map to make sure you are holding the map correctly. An example heading might be n63e.

It is read the west half or the west half of the east half of the north east quarter. Is defined by statute as a map or. If the scale ratio had a number like 1:65,000, though, that would mean that each inch on the map covered 65,000 inches of terrain.

Image result for giving directions in english